Sustainability

End-of-life tyres (ELTs) are collected by authorised collectors, clearing tyres that have been discarded in nature.

The collected ELTs are brought to the recycling facility by carriers.

Facility staff feed the waste tyres into the shredder.

The shredded tyres coming out of the shredder are collected in containers.

The facility supervisor dispatches the carrier. The full container is collected and taken to the facility where granules are produced.

The shredded ELTs are fed into the granulator at the second facility and the tyres are reduced to the required granule size.

The granules are bagged. The bags are picked up by forklift and fed into the mixer.

Press operators spread the prepared mix evenly in the press mould and the products are pressed.

The pressed products are placed on racks and left to cool.

After quality control, the cooled products are stacked on pallets.

The pallets are wrapped by the packing operator and loaded onto the delivery vehicle by forklift.

The products are transported by vehicle to the customers’ sites.

The products are delivered to application areas such as railway systems, playground equipment, gyms, rehabilitation centres and indoor use.

When a product reaches the end of its service life, it is brought back to the facility. The products are shredded into granules again and fed back into the production process.